Pi-Timolo Timelapse

  STL files for this project are available at Printables and can be found HERE.

This is a time lapse camera using Pi-Timolo and it can do Timelapse, Motion, and Lowlight.  So far I have only done a few time lapses with it though.  The case I designed is similar to my other case but this one uses a short Pi cable.

This project also uses a Pi Zero W and both the camera and Pi fit in the 3D printed housing.

This design of this case also allows me to use some different add on Lens.  This one is a clip on 0.45x Wide Angle Lens…

…and unscrewing the Wide Angle Lens turns it into a 12.5x Macro Lens. (I found this on Amazon HERE.)

I also have these which are a Fish Eye Lens, Wide Angle Lens, Macro Lens (not shown), and a Telephoto lens. (These were also found this on Amazon HERE.)  These stick on with a magnetic washer base but I still have to test these. 

The base on this one also has room for a 1/4-20 nut for use with a tripod.

Short loop of a test during the Connecticut River Ice in 2018

I tried to get the sunset in Treasure Beach Florida but the clouds didn’t cooperate.

Macro Lens Test…. has some weird lighting issues though.

All Information, Pictures, and Material is copyright © 2018 by Stephen Thone and may not be used for any personal or commercial purposes without the consent of the author. All rights reserved. The Author makes no guarantees or warranties as to the accuracy or completeness of, or results to be obtained from accessing and using the Information herein.