Small Parts Box

STL files for this project are available at Printables.com and can be found HERE.

This is just a quick simple small parts box with magnetic closer. I made this for my ultralight crankbaits but it could be used for anything.  It uses a piece of 1.75mm filament for the hinge pin (with the ends melted flat) and (4) 3/16″ x 1/8″ magnets in the front two corners to keep lid shut.

All Information, Pictures, and Material is copyright © 2018 by Stephen Thone and may not be used for any personal or commercial purposes without the consent of the author. All rights reserved. The Author makes no guarantees or warranties as to the accuracy or completeness of, or results to be obtained from accessing and using the Information herein.